LevelOne KCM-0832 Bruksanvisning

LevelOne Bryter KCM-0832

Les nedenfor 📖 manual på norsk for LevelOne KCM-0832 (4 sider) i kategorien Bryter. Denne guiden var nyttig for 23 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
LevelOne
K - 32 / KCM- CM 08 1632
8 / -Port KVM Module 16
Quick Installation Guide
Package Checklist
Quick Installation Guide
Introduction
Each Host port connector is HDDB15 type. The 3- -1 VGA cable s a HDDB15 male connector at one end, plug it into in ha PC
port of KVM switch back panel, and plug the other ends connectors to PC VGA port, and if
PS/2 Computers Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse port --- .
USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into available USB
port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human
Interface Device), no extra driver needed.
Note: the PS/2 mouse connector should be left dis connected.
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned o.
Install Modular KVM Switch
1. Pus h KVM switch into the rails from rear of cabinet.
2. Slide the unit into the rack and secure it to the rack.
Install the Computer/Server on Host Side
Local Console Connect the keyboard, mouse and monitor to the local console port--- s.
The recommend Power sequence is as follows: monitor, KVM Switch, nally the computers. ed Up

Produkspesifikasjoner

Merke: LevelOne
Kategori: Bryter
Modell: KCM-0832

Trenger du hjelp?

Hvis du trenger hjelp med LevelOne KCM-0832 still et spørsmål nedenfor, og andre brukere vil svare deg




Bryter LevelOne Manualer

Bryter Manualer

Nyeste Bryter Manualer