BlueBuilt BBUSWMVM5775 Bruksanvisning

Les nedenfor 📖 manual på norsk for BlueBuilt BBUSWMVM5775 (9 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 16 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
Ultra Slim Full Motion Wall Mount
Ultra Slim Full Motion Muurbeugel
Ultra Slim Full Motion Support Mural
Ultra Slim Full Motion Wandhalterung
FLYING START.
Whoooo.
951017 - BBUSFMWM3775
V1.0
16
14
11
10
12 9
813
15
2
5
4
3
6
1
7
In the box:
1
TV frames
2
TV frames
3
Bag A: rings and spacers for the TV
4
Bag B: hex key, screws, plugs, and rings for the wall
5
Cable management
6
Spirit level
7
Installation template
WALL MOUNT INSTALLATION.
Getting the hang of it.
30 minutes 2 people 2 coffees
From your own toolbox:
8
Cross-head screwdriver
9
Wall scanner
10
4.5mm drill bit
11
10mm drill bit
12
Pencil
13
Tape measure
14
Hammer
15
Impact drill or concrete drill
16
Cup of coffee
EN
3
CHECKLIST.
Does the tick.
Suitable surfaces:
J Solid brick
J Solid concrete
§J Dry wall with wooden pillars
behind it
Before drilling:
Use the wall scanner to
check if there aren’t any
pipes or cables behind the
wall.
Do you have a question?
Coolblue.nl/en/
customer-service
Coolblue isn’t liable for any
injury, damage, or arguments
with your partner caused by a
wrong installation. In doubt if
you can do this yourself? Ask a
professional installer.
EN
Determine the location of your TV on the
wall and draw out where you want the
bottom of your TV to be. Move up with
the same distance you just measured and
draw an X.
Have your items ready. Place the wall
mount
1
on a soft rug to prevent
damage.
Use the template
7
to draw the 4 drill
holes at the height of the X.
Do this level
8
.
Place your wall mount
1
on the TV and
measure the distance from the bottom of
the TV to the drill holes in the wall mount.
Write down the distance:
cm
Drill holes in your wall. For extra
accuracy, first use the 4.5mm drill
10
and
then the 10mm drill
11
. en, hammer
the plugs from bag B
4
into the holes.
Click the 4 caps off the wall mount
1
by
pulling them towards you.
STEP 1.
Get the wall mount ready.
STEP 4.
Determine the location.
STEP 2.
Remove the caps.
STEP 5.
Mark the height.
STEP 3.
Measure the distance.
STEP 6.
Drill the holes.
EN
Snap the 4 caps back on the wall
mount
1
.
Want to tilt the TV? Tighten the middle
bolts. at way, you can tilt the TV
forwards or backwards.
Mount the frames
12
to your TV. Use the
rings and the spacers from bag A
3
to
make the screws fit perfectly.
Place your TV in one of the triangles in
the mount with the upper screw. e
bottom screw will automatically fall into
one of the bottom holes. Tighten the bolts
again.
Mount the wall mount
1
to the wall with
the screws and rings from bag B
4
.
Stick the cable management
5
to the
wall and press the cables into it.
STEP 7.
Place the wall mount.
STEP 11.
Hide the cables.
STEP 8.
Place the caps.
STEP 12.
Adjust the mount.
STEP 9.
Mount the frames.
STEP 10.
Place the TV .
544

Produkspesifikasjoner

Merke: BlueBuilt
Kategori: Ikke kategorisert
Modell: BBUSWMVM5775

Trenger du hjelp?

Hvis du trenger hjelp med BlueBuilt BBUSWMVM5775 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert BlueBuilt Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer