Tripp Lite NGI-M05-C1 Bruksanvisning

Tripp Lite Bryter NGI-M05-C1

Les nedenfor 📖 manual på norsk for Tripp Lite NGI-M05-C1 (254 sider) i kategorien Bryter. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/254

system, or transmitted in any form or by any means, whether electronic, mechanical,

photo copying, recording or otherwise, without the prior written permission of the

publisher.

FCC WARNING

This equipment has been tested and found to comply with the limits for a class

A device, pursuant to part 15 of FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a commercial installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communication. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case, the user will be required to correct the

interference at the user’s own expense.

This is a Class A product. In a domestic environment, this product may cause

radio interference in which case the user may be required to take adequate

measures.

HOT & COLD WARNING

The Switch surface will be getting very hot or cold depend on the operating

environment. Please take special care when touch to the working switch.

Take special care to read and understand all the content in the

warning boxes.

Do not work on the system or connect or disconnect cables during

periods of lightning activity.

Before working on equipment that is connected to power lines,

remove jewelry (including rings, necklaces and watches). Metal

objects will heat up when connected to power and ground and can

cause serious burns or weld the metal object to the terminals.

Do not stack the chassis on any other equipment. If the chassis falls,

it can cause severe bodily injury and equipment damage.

An exposed wire lead from a DC-input power source can conduct

harmful levels of electricity. Be sure that no exposed portion of the

DC-input power source wire extends from the terminal block plug.

Ethernet cables must be shielded when used in a central office

environment.

If a redundant power system (RPS) is not connected to the switch,

install an RPS connector cover on the back of the switch.

Warning

Read the wall-mounting instructions carefully before beginning

installation. Failure to use the correct hardware or to follow the correct

procedures could result in a hazardous situation to people and

damage to the system.

Before performing any of the following procedures, ensure that power

is removed from the DC circuit.

Read the installation instructions before connecting the system to the

power source.

To prevent bodily injury when mounting or servicing this unit in a rack,

you must take special precautions to ensure that the system remains

stable. The following guidelines are provided to ensure your safety:

 This unit should be mounted at the bottom of the rack if it

is the only unit in the rack.

 When mounting this unit in a partially filled rack, load the

rack from the bottom to the top with the heaviest

component at the bottom of the rack.

 If the rack is provided with stabilizing devices, install the

stabilizers before mounting or servicing the unit in the rack.

This unit might have more than one power supply connection. All

connections must be removed to de-energize the unit.

Only trained and qualified personnel should be allowed to install,

replace or service this equipment.

Warning

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	Bryter
Modell:	NGI-M05-C1
Vekt:	530 g
Bredde:	31 mm
Dybde:	104.9 mm
Høyde:	136.1 mm
LED-indikatorer:	Speed, Power
Sertifisering:	FCC, CE, RoHS, REACH
Auto MDI/MDI-X:	Ja
DHCP-funksjoner:	DHCP snooping
Jumbo rammer:	10000
DIN-skinnemontering:	Ja
Produktfarge:	Sort
Driftstemperatur (T-T):	-10 - 60 °C
Oppbevaringstemperaturomåde (Celsius):	-40 - 85 °C
Kroppsmateriale:	Metall
Relativ luftfuktighet under drift (H-H):	5 - 95
Svitsjtype:	Håndtert
Antall Basic switching RJ-45 Ethernet-ports:	5
Basic switching RJ-45 Ethernet ports-type:	Gigabit Ethernet (10/100/1000)
Størrelse på adressetabell:	8000 oppføringer
Ruting/svitsjekapasitet:	12 Gbit/s
Kan stables:	Ja
Strømforsyning medfølger:	Ja
Strøm over Ethernet (PoE):	Nei
DC inngående spenning:	24 - 57 V
Jumbo Frames-støtte:	Ja
Innput-strøm:	6 A
SFP module antall spor:	1
MAC-adresse automatisk læring støttes:	Ja