CRUX RFM-UC1 Bruksanvisning

Les nedenfor 📖 manual på norsk for CRUX RFM-UC1 (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 17 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/4
CDR-31C Cargo Camera CDR-02 Tailgate Handle Camera CUB-15 Adjustable Angle Side Camera
RFM-UC1
Multi View Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
rev.013019
1 of 4
- Adds a reverse camera input, plus 5 video inputs and an addional audio/video input.
- Uses the steering wheel control buons to toggle between video sources. (except OEM backup camera. See page 3)
- Turn signals automacally trigger the corresponding side camera.
- Turn signal camera trigger can be turned on or o by using the BACK buon on the radio.
PRODUCT FEATURES:
PARTS INCLUDED:
RFM-UC1Module RFM-UC1 Harness
OPTIONAL ADD-ON CAMERAS:
Oponal add on cameras are available to complete the mul-view capability of the RFM-UC1. Cameras available
and include:sold separately
CFF-01 Bullet Type Front Camera CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
rev.013019
2 of 4
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Front Camera Input
Right Camera Input
Left Camera Input
Cargo Camera Input
Aftermarket Backup Camera Input
Trailer Camera Input
Audio/Video
Input
Front and Rear Camera Power Output 12V (purple/white)
Left and Right Camera Power Output 12V (green/white)
Cargo and Trailer Camera Power Output 12V (orange/white)
Video AUX Power Output 12V (red/white)
To Vehicle Harness
To Radio
Connect this 6-pin plug if OEM
backup camera is being used
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3Le Camera ON Le Camera OFF
4 Right Camera ON Right Camera OFF
5 Cargo Camera ON Cargo Camera OFF
6 Trailer Camera ON Trailer Camera OFF
7AUX A/V ON AUX A/V OFF
8 Set to ON
RFM-UC1
Multi View Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
rev.013019
3 of 4
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
OPERATION:
1. Whether an aermarket or OEM backup camera is used,
pung the gear in reverse will automacally show the
backup camera image on the screen.
2. Pung the gear to drive aer the reverse process
turns on the front camera for 7 seconds.
3. Using the le and right turn signal triggers the respecve
side mirror mounted camera to show on the screen.
4. To turn o the automac triggering of the side mirror
cameras, move the turn signal switch to the camera to
be turned o and press the BACK buon on the radio for
3-5 seconds. Repeat the process to turn it back on. With
the turn signal switch in nuetral, the same buon turns
on the VIM feature.
5. To force view the cameras installed, press and hold the rear
right side steering wheel control middle buon to toggle through
the dierent cameras. (Forced view of the backup camera is
only available if using an aermarket backup camera.) While in
reverse gear, press and hold the same buon to toggle between
reverse camera and video input (i.e cargo or trailer camera).
6. To use the AV input, press and hold the le rear side
steering wheel control middle buon to toggle to AV
mode. Audio plugged in the AV RCAs will automacally
be heard through the OE audio system. No need to plug
to the AUX input of the vehicle.
RFM-UC1
Multi View Integration Interface with A/V Input for
DODGE, JEEP & RAM Vehicles with Uconnect 8.4” Systems

Produkspesifikasjoner

Merke: CRUX
Kategori: Ikke kategorisert
Modell: RFM-UC1

Trenger du hjelp?

Hvis du trenger hjelp med CRUX RFM-UC1 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert CRUX Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer