CRUX SOCGM-17C Bruksanvisning
CRUX
Ikke kategorisert
SOCGM-17C
Les nedenfor 📖 manual på norsk for CRUX SOCGM-17C (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 2 brukere
Side 1/3
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.09282021
1 of 3
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
- Supports Bose, Monsoon, Y-91 audio* and non-amplied audio systems.
- Retains chime functions.
- Built-in chime volume adjustment.
- EIA color coded wiring for easy installation.
PRODUCT FEATURES:
PARTS INCLUDED:
SOCGM-17C Module SOCGM-17C Harness
INSTALLATION DIAGRAM:
SOCGM-17C
Radio Replacement Interface for GM Class II Vehicles with
Factory Amplied (Bose/Monsoon) and Non-Amplifed Audio Systems
*Does not retain Y-91 Premium Bose amplier on 2002-2004 trucks and SUVs; use part# SWRGM-48 instead.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2 of 3
RADIO REPLACEMENT
SWC RETENTION
+
R
INTERFACING SOLUTIONS
SELECTING THE AUDIO SYSTEM:
SOCGM-17C
Radio Replacement Interface for GM Class II Vehicles with
Factory Amplied (Bose/Monsoon) and Non-Amplifed Audio Systems
If the vehicle is equipped with an amplied audio system, the SOCGM-17C has a built-in audio level
adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use
this feature, plug in the male 8-pin connector on the SOCGM-17C harness to the GRAY female 8-pin
connector on the SOCGM-17C module. The module is also labeled “Bose” and “Non Bose” to avoid
confusion. (see picture below)
If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the
BLACK female 8-pin on the SOCGM-17C module.
Non-BOSE
(Non-Amplied)
Connecon
BOSE
(Amplied)
Connecon
CHIME VOLUME ADJUSTMENT:
The SOCGM-17C has a potentiometer to adjust the chime volume. It is set at half way by default. To
adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase
the volume and counter-clockwise to decrease the volume.
Chime
Volume
Adjustment
rev.09282021
Produkspesifikasjoner
| Merke: | CRUX |
| Kategori: | Ikke kategorisert |
| Modell: | SOCGM-17C |
Trenger du hjelp?
Hvis du trenger hjelp med CRUX SOCGM-17C still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert CRUX Manualer
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
11 Mars 2025
11 Mars 2025
Ikke kategorisert Manualer
- Nearity
- Qu-Bit
- DataVideo
- Flycam
- OSEE
- Aconatic
- Antec
- Ikon
- Tru Components
- Lowell
- Konica Minolta
- Caple
- New Pol
- Nevadent
- Signature Hardware
Nyeste Ikke kategorisert Manualer
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025