CRUX RVCCH-75R Bruksanvisning

Les nedenfor 📖 manual på norsk for CRUX RVCCH-75R (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 12 brukere

Side 1/3
RVCCH-75R
Rear View with VIM Integration Interface and
Tailgate Handle Camera for RAM Trucks
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
Acvates Mygig radio for enabling video features
Tailgate handle camera included
Interface includes Audio / Video Input to connect an extra A/V source
Automacally switches to Rear-view when car is in Reverse mode
Supports vehicles with manual transmission but does not supply +12V Reverse Trigger. Camera power
must be tapped from the +12V reverse light wire instead
Plug & Play Installaon
PRODUCT FEATURES:
PARTS INCLUDED:
RVCCH-75R Module RVCCH-75R Harness Tailgate Handle Camera
INSTALLATION DIAGRAM:
WHITE Wire
Parking Guideline
DP
ON
DIP
SWITCH
LED
LED RED = Power ON Status
LED BLUE = Data Bus ON Status
Regulator
20 Ft. Coax Cable
8-Pin Molex
TO RADIO
WHITE
22-PIN
(MALE)
GRAY
22-PIN
(MALE)
WHITE
22-PIN
(FEMALE)
GRAY
22-PIN
(FEMALE)
TO FACTORY
HARNESS
Tap Green wire to +12V ACC for non
permanent VIM. Set DIP 1 to OFF.
(toggle switch not included)
WHITE Wire*
(Camera Power Output
+12V 250mA)
RED Wire
Tape O
(Not Used)
*Note that the white wire does not supply Reverse Trigger on Manual
Transmission and should be insulated .Camera power must be connected
to factory reverse light wire instead.
To Source Ground
(ground wire)
(not chassis ground)
A/V OUT
A/V INPUT
To +12V ACC

Produkspesifikasjoner

Merke: CRUX
Kategori: Ikke kategorisert
Modell: RVCCH-75R

Trenger du hjelp?

Hvis du trenger hjelp med CRUX RVCCH-75R still et spørsmål nedenfor, og andre brukere vil svare deg