CRUX RVCMT-69 Bruksanvisning

Les nedenfor 📖 manual på norsk for CRUX RVCMT-69 (6 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 17 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/6
- Acvates Reverse camera input.
- Adds three A/V Inputs.
- -screen display setup. On
- Switch the video sources via the OE buons.
MASERATI
2008 Up
1 / 6
Rev.120116
Unplug OEM LVDS cable from the OEM monitor (which is connected to the Command box) and plug
it into the of the LVDS Controller box. LVDS INPUT
Connect the LVDS cable supplied in the kit to the of the RVCMT- and to the of LVDS OUT 69 LVDS IN
the LVDS Controller box.
Connect the LCD cable supplied in the kit to the of the LVDS controller box an into the LVDS OUT
OEM monitor.
Connecng the CAN Wires
1. Tap CAN HIGH (Brown/Green) from the Power harness to the CAN HIGH (Black/Pink) wire on the Command.
2. Tap CAN LOW(Green) from the Power harness to the CAN LOW (White/Pink) wire on the Command.
1
2
3
2 / 6
Rev.120116
DIP Switch Sengs
Disconnect power to the interface before seng the DIP switches.
DIP#
Funcon
Selecon
1
RGB INPUT MUTE
ON : Skip RGB Mode
OFF : RGB Display
2
A/V 1 MUTE
ON : Skip A/V 1
OFF : A/V1 Display
3
A/V 2 MUTE
ON : Skip A/V 2
OFF : A/V2 Display
4
A/V 3 MUTE
ON : Skip A/V 3
OFF : A/V3 Display
5
Not Used
6
Not Used
7
Rear Mode
ON : Aermarket Rear Camera
OFF : OEM Rear Camera
8
Not Used
Remote Control Functions
Funcon
POWER & PIP
No Funcon
MENU
Acvate OSD menu
OK
Make a selecon, change image display
Move upward
Move downward
Move le
(press this buon for more than 5 seconds to
access to the factory mode)
Move right
(press this buon for more than 2 seconds to
reset all the data about user environment)
3 / 6
Rev.120116

Produkspesifikasjoner

Merke: CRUX
Kategori: Ikke kategorisert
Modell: RVCMT-69

Trenger du hjelp?

Hvis du trenger hjelp med CRUX RVCMT-69 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert CRUX Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer