CRUX RVCMZ-72 Bruksanvisning
CRUX
Ikke kategorisert
RVCMZ-72
Les nedenfor 📖 manual på norsk for CRUX RVCMZ-72 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 16 personer og ble vurdert med 3.9 stjerner i gjennomsnitt av 8.5 brukere
Side 1/1
RVCMZ-72
Rear View Integration with Lip Mount Camera
for Select Mazda Vehicles
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.1103201 of 1
- Automacally switches to rear-view when vehicle is in reverse gear.
- Includes universal lip mounted camera.
- Plug and play installaon.
PRODUCT FEATURES:
INSTALLATION DIAGRAM:
Installing the Camera
NOTE: Test the camera for funconality prior to nalizing the installaon.
1. Remove the rear panel between the Mazda emblem and license plate using a panel removal tool.
2. Drill a 5/8” size hole in the locaon.
3. Fish the camera cable through the drilled hole into the trunk area.
4. Remove the factory radio to gain access to the connectors.
5. Route the camera cable towards the radio and mke the power and video connecons. Tap the red wire from the camera
cable (coming out of the yellow RCA) to the red wire of the RVCMZ-72 harness. The red wire (near the camera) is NOT used.
Insulate it to prevent it from shorng. Tap the ground wire (black) near the camera to a solid chassis ground. If for some
reason video noise is present, the RVCMZ-72 provides a ground wire which can then be used to ground the camera instead of
using chassis ground. See diagram for reference.
VEHICLE APPLICATIONS:
2013 - 2015 CX-5
2007 - 2012 CX-7
2007 - 2015 CX-9
2011 - 2015 Mazda6
PHONE
SETUP
SEEK
SEEK
Factory
Radio
AUDIO
NAV
VOL TUNE/FILE
4-Pin
(Female Plug)
Video
Connection
WHITE**
Parking Line
Cut = OFF / Connect = ON
BLUE
(not used
keep connected)
**NOTE: Changes to the parking line option
will take eect after a power cycle.
Camera Power
Regulator
*Camera Ground
(to chassis)
Red wire
Not Used (Insulate)
Make sure the arrows
line up and push in
the connectors well.
*Ground “A”
*NOTE on Grounding the Camera:
If video noise is present when using chassis ground,
run a wire from Ground “A” to the camera ground instead.
PARTS INCLUDED:
RVCMZ-72 Harness CUL-04 Camera 20 . Extension Cable
Mazda (with factory screen)
Produkspesifikasjoner
| Merke: | CRUX |
| Kategori: | Ikke kategorisert |
| Modell: | RVCMZ-72 |
Trenger du hjelp?
Hvis du trenger hjelp med CRUX RVCMZ-72 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert CRUX Manualer
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
11 Mars 2025
11 Mars 2025
Ikke kategorisert Manualer
- Suzuki
- Rupert Neve Designs
- Liebherr
- Hobart
- Caberg
- Ergobaby
- Enermax
- Multibrackets
- Fisher Paykel
- Cecotec
- Proctor Silex
- Compex
- DQ
- OKAY
- Festo
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025